DELTA-DRAIN 6200 HI-X 6' x 50'
Dorken Systems
#22600018
DELTA-DRAIN 6200 HI-X is a high-performance drainboard that features a tough polymeric sheet adhered to its back surface. The protection sheet prevents viscous flow and die cutting of soft liquid or sheet applied waterproofing products.
DELTA®-DRAIN 6200 HI-X is a high performance, 3-dimensional drainage composite with three layers. It consists of a dimpled drainage core and a high strength needle-punched polypropylene (PP) geotextile (non-woven) with excellent filter characteristics. A polymeric protection sheet adhered to the backside of the drainage core provides protection against die-cutting of waterproofing membranes. The drainage core is made from a special co-polymer polypropylene that provides high impact and tear resistance, and is unaffected by environmental stress cracking. The non-clogging geotextile is fully bonded to the dimpled drainage core, which prevents it from being pushed into the flow channels by the load of the backfill material.
DELTA®-DRAIN 6200 HI-X has been specifically designed for use over waterproofing membranes where added protection is needed. The high strength polymeric film adhered to the back side of the drainage core helps to protect from die-cutting into the waterproofing membrane when under load from backfill. DELTA®-DRAIN 6200 HI-X provides a continuous path for water discharge and relieves hydrostatic pressure buildup. The non-woven geotextile allows water to pass freely into the drainage core. At the same time it prevents the passage of soil particles to ensure that the drainage core doesn’t get clogged. DELTA®-DRAIN 6200 HI-X is the ideal solution for applications where high drainage capacity is required. Subsurface water can pass easily into the drainage core where gravity feeds it into the drainage system at the bottom of the foundation. DELTA®-DRAIN 6200 HI-X is highly pressure resistant and able to withstand loads of up to 15,000 psf (723 kN/m2). The product is rot-proof.
It is suitable for applications in underground wall construction, and as relief layer for hydrostatic pressure on any subsurface structure. It is specifically designed to function as a protection board in a waterproofing system. DELTA®-DRAIN 6200 HI-X comes in two roll sizes (4’x50’ or 6’x50’). Its flat side is installed directly against the waterproofing membrane on wall surfaces.
