Speed-E-Roc Rapid Setting Anchoring Cement Grout (50 Lbs)

MSDS DataSheet

Rapid-Setting Anchoring Cement Grout. Speed-E Roc is a pourable, rapid setting and hardening, high strength, hydraulic cement compound designed for anchoring and grouting. Speed-E Roc has a controlled expansion system and is non-shrink. Speed-E Roc has an initial set time of 10-20 minutes at 77?? F (25?? C) and obtains 5,000 psi (34.4 Mpa) in one hour. Sold by the 50-lb pail.

Speed-E Roc is ideally suited for anchoring rails, bolts, ties, dowels, reinforcing steel, threaded rods, sign posts, parking meters, street signs and ornamental steel work into concrete or any other properly-prepared, porous, hardened material.
Speed-E Roc may be used as a precision, highly flowable and rapid-setting grout for machinery base plates, bearing plates and columns. It is suitable for industrial, residential and civil engineering applications.
The product can be used in either interior or exterior applications, freeze-thaw and wet environments.
Very rapid hardening and setting properties.
Suitable for exterior and interior applications.
Freeze-thaw stable; may be used in wet environments.
Very high one hour and 24-hour strengths .
Controlled expansion.
Cement-based; contains no chloride accelerators.
Friendly grayish appearance.
Non-metallic and contains no chlorides.
Easy to use; just mix with water.
Very pourable.
Accelerates Portland cement based materials.

SPEED-E-ROC is ideally suited for anchoring rails, bolts, ties, dowels, reinforcing steel, threaded rods, sign posts, parking meters, street signs and ornamental steel work into concrete or any other properly-prepared, porous, hardened material. SPEED-E-ROC may be used as a precision, highly flowable and rapid-setting grout for machinery base plates, bearing plates and columns. It is suitable for industrial, residential and civil engineering applications. The product can be used in either interior or exterior applications, freeze-thaw and wet environments.

Not intended to be used as an underlayment or overlay.
Do not apply below 35° F (1.7° C) or above 95° F (35° C) or when rain is imminent.
Protect from freezing for a minimum 24 hours. SPEED-E-ROC should be crowned or shaped as to allow water flow away from anchor and/or coated with a concrete sealer or penetrating sealer.
Do not add any admixtures.
Exceeding liquid requirements shall result in reduced physical properties.
Realize that set time will decrease as the product, air, substrate and mixing liquid temperature increases and will be increased as the temperature decreases.
Failure to follow industry standard practices may result in decreased material performance.
Proper application is the responsibility of the user. Field visits by W. R. MEADOWS personnel are for the purpose of making technical recommendations only, and are not to supervise or provide quality control on the jobsite.

See Technical Information for More Details